-40%
PROENGIN AP2C-e Chemical Warfare Agent Detector & Monitoring Device
$ 1188
- Description
- Size Guide
Description
PROENGIN AP2C Chemical Warfare Agent Detector & Monitoring Device. Condition is "Used". Shipped with USPS Priority Mail.New cost is over ,000 per unit. You are buying 3 units. These are untested units.
The AP2C unit is a Chemical Warfare (CW) agent detector. It detects nerve and mustard agents and identifies Vx in liquid and vapor forms. This sensitive chemical warfare detector is sensitive to low sarin concentrations of 10 micrograms/m³ in 2 seconds. The AP2C detector is ideal for initial reconnaissance, providing unique capabilities for mass screening and monitoring decontamination on casualties and equipment. The AP2C Chemical Warfare (CW) agent detector is constructed to military specifications and is utlized by military forces and emergency response teams worldwide. Users include military, police and fire departments in France, Sweden, Israel and Australia, and the United states.
Model AP2C Chemical Warfare Agent Detects:
VX
Vx- Agent
VE
Ve-Agent
VG (Vm)
Amiton
GA
Tabun
GB
Sarin
GD
Soman
GF
CycloSarin
GE
Isopropyl ester
HD
Mustard
HT
Sulfur Mustard
H
Sulfur Mustard
Not suitable for use to detect Toxic Industrial Materials, Gases & Vapors
Monitor initial contamination and screening of casualties
Monitor residual contamination after decontamination of personnel, casualties, equipment, infrastructure and ground.
Immediate detection of chemical contamination by flame spectrophotometry (sulphur & phosphorus atoms)
Simultaneous G, V, HD agent detection
Immediate detection of chemical contamination by flame spectrophotometry (sulphur & phosphorus atoms)
Simultaneous G, V, HD agent detection
Cycle time: 1 minute after a detection
AP2C Chemical Warfare Agent Detector is available with various accessories and interfaces for expanded surveillance use, special applications, test modules and portable test bench. Also available in versions for vehicular use and portable detection alarm systems. Other equipment available for facilities and marine detection systems.
AP2C kit provides instant detection of chemical warfare agents in both vapor and liquid forms. AP2C is engineered to detect traces of vapor or liquid contamination by nerve and mustard (G, V, HD) agents simultaneously in all operational and climate conditions, even if the agents are not chemically pure.
Specifications:
Sensitivity: 1.7.10-3 ppm GB (10mg/m³)
1.7.10-3 ppm HD (400mg/m³)
Response Time: less than 2 seconds
Operation: £ 2 minutes (T ³ 68º F)
Duration: 12 hours with battery unit & H2 storer
Unit Weight: 4.4 Lbs. (2 Kg)
Weight of S4PE (liquid detector): 0.9 Lbs. (.4 Kg)
Kit Weight: 13.2 Lbs. (6 Kg)
Kit Dimensions: 18.1 x 7.1 x 4.7 inches (460mm x 380mm x 170mm)
Storage Temperature: -38.2°F to +160°F (-39°C to + 71°C)
Rain Proof (model AP2Ce Intrinsically Safe)
Decontaminable body/interchangeable wedging
Shock proof, withstands being dropped from 39.37 in (1 m) high